BOROSILICATE GLASSWARE - Reaction Distillation Unit

The unit has been designed to suit the customer's requirement of combination of versatile reaction/distillation or combination for pilot plant work. This has the flexibility of working at atmospheric pressure as well as under vacuum. Typical unit has a reaction vessel fitted in a metal heating/cooling multipurpose bath having facility for heating and cooling both by means of heating/cooling fluids as a media. Special type Teflon sleeved stirrers are available in different type to suit customer's requirement of high speed reaction/slurry reactions. The stirrer extends through the centre of the reactor to minimise dead volume at the bottom. It is equipped with standard stirrer drive with mechanical seal assembly having options of speed variation by mechanical variator /electronic variator. Reflux Distillation adapter and coil type condensers are fitted to the side neck of vessel with glass packed column to enhance the distillation.

Fractional Distillation Unit

The unit is typically used for only distillation and fractionation under vacuum or at atmospheric pressure. The above units are available in 20 ltr./50 ltr./100 ltr./200 ltr. capacity with round bottom reactor and upto 300 ltr. capacity with cylindrical reactor.

Glass Assembly on GLR

This type of typical unit is mounted on a vapour nozzle of glasslined reactor. The assembly has a Glass packed column to enhance distillation. Reflux divider and reflux condenser with twin receiver system is to facilitate working under vacuum or at atmospheric pressure. Receiver system is equipped with product cooler, Vent/Vacuum Valve and drain valve.

Back